![]() ![]() (1) Module is disabled, rate may not be relevant. | | Temperature | Voltage | Frequency | OPerating Point | OMAPCONF (rev v1.74-1-g40ab0a2 built Fri Jan 22 21:22:)ĭRA75X ES2.0 GP Device (STANDARD performance (1.5GHz))Īuthor: gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36) You can check the core clock frequencies by running the following command ( omapconf show omapconf show opp Continue following the Building U-Boot for MitySOM-AM57X instructions to build and install the newly modified version of U-Boot. Select one of the core frequencies you'd like to change and select the option (Example is setting DSPEVE to OPP_HIGH, which sets the DSP frequency to 750 MHz)Įxit out of menuconfig and save the changes to the config. In menuconfig, navigate to ARM architecture -> Voltage Domain OPP selections -> ![]() Below is an example after the U-Boot source has been checked out and the build environment has been set up. ![]() To select a different core frequency, run menuconfig after you have run the defconfig setup. Modifying U-Boot to change core frequency ¶ The following core frequencies can be modified: The following assumes you have set up the build environment for compiling U-Boot found here: Building U-Boot for MitySOM-AM57X ![]() The clock frequencies of the different cores can be changed from U-Boot through menuconfig. Errata and Module Product Change Notifications.Building Vivado Example Projects for MitySOM-AM57X.Building TI Linux SDK and IPC examples on Linux.Adding IPC to TI RTOS template app with CCS. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |